HOME jlppai@bellsouth.net  

HOME

Floor/Garage Coatings

#4000 Series Premium Trim & Deck House Enamel


4000
A premium quality interior/exterior alkyd semi-gloss enamel, it has been specially formulated with superior alkyd resins which help provide superior toughness. It has excellent levelling properties, resists sagging, is abrasion and mar resistant, resists water spots and is mildew resistant. It applies easily and has excellent product versatility on both interior and exterior metal surfaces. Available in 4000-White, 4001-Tint Base, 4000-Deep Base, 4003-A-Accent Base, 4006-Walnut Brown, 4007-Country Redwood, 4008-Charleston Green, 4009-Deck Gray, and 4010-Battleship Gray. For Interior & Exterior Use.

  • Excellent Durability
  • Applies Easily
  • Mildew Resistant
  • Resists Sagging
  • Abrasion & Mar Resistant
  • Excellent Levelling Qualities
  • Excellent Coverage
  • Product Versatility

#4200 Series, Deck Guard 100% Acrylic Pool, Patio & Deck Coating

 

MPI Logo4200
A specially formulated 100% acrylic floor coating, specifically designed for use on properly prepared pool decks, patios and other cementitious deck surfaces. Its smooth low sheen finish provides excellent weather resistance, hardness and durability, and resists fading, peeling and chipping. It applies easily, provides excellent coverage, is mildew resistant, may be applied to previously painted surfaces, and offers excellent product versatility for application to a variety of interior and exterior applications. Available in 4200-White, 4201-Tint Base, 4202-Deep Base, & 4203-A-Accent Base, as well as 10 ready-mixed colors. Meets MPI Standard #127 of the Master Painters Institute's approved products list. For Interior & Exterior Use.

  • 100% Acrylic Formula
  • Easy To Apply
  • Excellent Durability
  • Fade Resistant
  • Smooth Low Sheen
  • Resists Chipping & Cracking
  • Resists Peeling
  • MPI Approved

#4500 Series, 100% Acrylic Driveway & Floor Coating

 

MPI Logo4500
A specially formulated coating specifically designed for use on a variety of concrete substrates, such as floors, walkways, patios and driveways. Its special formulation provides excellent durability, fade resistance and a smooth low sheen finish that resists cracking, peeling and chipping. It applies easily, may be applied to previously painted surfaces, properly primed metal surfaces and even surface areas that have been previously coated with a concrete stain. It has excellent weatherability, and may be applied to both fresh and fully cured concrete surfaces. Available in 4500-White, 4501-Tint Base, 4502-Deep Base, & 4503-A-Accent Base, as well as 12 ready-mixed colors. Meets MPI #127 of the Master Painters Institute's approved products list. For Interior & Exterior Use.

  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Durability
  • Excellent Weather Resistance
  • Resists Chipping
  • Resists Cracking
  • Resists Peeling
  • MPI Approved

#2200 Industrial Polyamide Gloss Solvent Base Epoxy


2200-A
A two component, highly industrial solvent based polyamide-epoxy coating formulated for application on most new and/or previously painted substrates that are exposed to corrosive type of environments. Its epoxy formulation provides excellent chemical resistance, corrosion resistance, moisture resistance and alkali resistance. It also provides excellent hardness and durability, resistance to chemical cleanings, resists fresh & salt water, resists chipping, cracking & peeling and has excellent product versatility. Available in 2200-White, 2201-Tint Base, 2202-Deep Base and 2203-CB-Clear Base. For Interior Use Only.

  • Rust Inhibitive
  • Superior Durability
  • Corrosion Resistant
  • Moisture Resistant
  • Alkali Resistant
  • Chemical Resistant

V400 - Polyamide Epoxy

 

Polyamide Epoxy is designed for use in food and beverage processing, industrial maintenance, general metal finishing and fabrication, chemical processing, industrial and commercial flooring and other areas requiring maximum impact and abrasion resistance.

  • High Solids and High Build
  • Surface tolerant for marginal substrates
  • Hard scratch and impact resistant coating
  • Excellent for masonry and ferrous metals
  • Suitable for use in USDA inspected facilities

V440 - Waterborne Amine Epoxy

 


Waterborne Amine Epoxy is formulated to provide superior chemical, abrasion and impact resistance. The highly cross-linked film provides years of service in industrial and commercial applications and is particularly suited for use on concrete floors subjected to severe service conditions.

  • Low odor and Low VOC for occupied areas
  • Excellent abrasion and chemical resistance
  • Easy application and clean-up
  • Hard, scratch and impact resistant coating
  • Suitable for use in USDA inspected facilities

 

Interior Architectural          Exterior Architectural           Primers Coatings

Industrial Coatings     Floor/Garage Coatings      Specialty Coatings

Back to top of page

 

334-277-9650

34 Coliseum Boulevard

Montgomery, Alabama 36109

e-mail jlppai@bellsouth.net

Store Hours

Monday - Friday 7:00 to 5:00

Saturday 8:00 to 12:00